ArcelorMittal Dofasco


Page tools
Print Print
Bookmark Bookmark
Share on
Facebook Twitter

Cold rolled

ArcelorMittal Dofasco produces Cold Rolled sheet in a variety of sizes, grades and surface finishes to meet specific end-use requirements. Cold Rolled Sheet is manufactured from hot rolled coils by pickling to remove the surface oxide produced during the hot rolling stage, and cold reducing through a Cold Mill to the desired thickness.

Cold reducing steel produces an extremely low ductility product. It's usually processed further to develop desired end use characteristics such as formability, surface texture, flatness, etc. These further reprocessing steps include annealing and temper rolling for formability and surface texture, and in some cases, tension levelling for flatness.

Commercial Steel - ASTM A1008/A1008M CS Type A,B,C
Drawing Steel - ASTM A1008/A1008M DS Types A,B
Deep Drawing Steel - ASTM A1008/A1008M DDS
Extra Deep Drawing Steel - ASTM A1008/A1008M EDDS
UltraVitTM Porcelian Enamelling Steel - ASTM A424
Fully Developed Structural Steel
Structural Steel - ASTM A1008/A1008M SS (Grade 25, 30, 33, 40, 80)
Intermediate Temper
Full Hard Temper
High Strength Low Alloy Steel - ASTM A1008/A1008M * HSLAS
High Strength Low Alloy Steel - Formable ASTM A1008/A1008M HSLAS-F
CoreloxTMA, CoreloxTMB, CoreloxTMC - Motor Lamination Qualities
BenchmARCTM, EnviroARCTM - Flux Cored Arc Wekding Wire Steel
* Dofasco produces only Type 1 - Columbium

Size Availability
.381 mm (.015") to 3.6068 mm (.142") thickness
1569.7200 mm (61.8") maximum width

Typical End Uses
Automotive Parts, Electrical Motors, Lighting Ballasts, Major Appliances, Racking/Shelving, Water Heaters, Pools (Above Ground/Inground), Commercial Doors, Garage Doors, Drums And Pails, Strapping - Seals, Tubular Goods